Our speciality is high volume orders for but not limited to Hotel chains, Mirror Manufactures and cabinet makers.
If you have a large order or a tender to quote for please contact us for a very good bulk order rate*
We also export to most Worldwide destinations such as the Middle East and European countrys.
Contact us for a discount on multiple mirror heater
It’s always the little things that make all the difference. Using the very latest technology, we ensure mist free mirrors when you need them most. Any time you want them, for only a few pence a week.
Once fitted, the mirror will be steam free in and around the area round the pad.
The mirror heater comes in 6 different sizes chosen to fit most standard size mirrors. They are extremely easy to fit and a connection to the lighting circuit is the most preferential method click here for a full installation guide.
]]>
These heating pads are manufactured in the China specifically for mirrors and have been developed from a unique heating system which has been proven for over 12 years.
Our products represent the most up to date standard of technology, giving a high standard of temperature stability and resistant to moisture, vibration, shock, dust and ageing.
Mark out the back of the mirror to indicate where the mirror heater pad is to be fitted
Peel off the protective paper exposing the ‘sticky’ side of the mirror heater
Position one edge of the mirror heater pad in the desired position on the keeping the other edge away from the mirror
Gradually lower the pad onto the mirror applying even pressure to ensure there are no air bubbles or creases
If the mirror is not framed & is being fitted directly onto the wall, a small recess will need to be made in the wall to compensate for this & allow the mirror to sit flush.
All wiring must conform to the latest IEE wiring regulations ( BS7671 equivalent).
It is recommended that the mirror heater pad is connected via the lighting circuit or on a separate switch.
The circuit should be protected by a 5amp fuse or circuit breaker
The wires are coloured as follows: BLUE – Neutral, and BROWN – Live/positive
The mirror heater pad must not be accessible once installed
Any metal part surrounding the mirror must be earthed & comply with current wiring regulations
Multiple heating pads may be fitted to a single mirror & should be connected in parallel – pads must not overlap
The mirror heater must not be cut or pierced as this may damage the insulation making it unsafe.








